◆ Bsqad()

Sub Bsqad	(	T() As	Double,
		Bcoef() As	Double,
		N As	Long,
		K As	Long,
		X1 As	Double,
		X2 As	Double,
		Bquad As	Double,
		Info As	Long
	)

Integral of B-representation of B-spline

Purpose: This routine computes the integral on [x1, x2] of a K-th order B-spline using the B-representation (T(), Bcoef(), N, K). Orders K as high as 20 are permitted by applying a 2, 6, or 10 point Gauss formula on subintervals of [x1, x2] which are formed by included (distinct) knots. If orders K greater than 20 are needed, use Bfqad with f(x) = 1.

Parameters

[in]	T()	Array T(LT - 1) (LT >= N + K) Knot vector.
[in]	Bcoef()	Array Bcoef(LBcoef - 1) (LBcoef >= N) B-spline coefficients.
[in]	N	Number of B-spline coefficients. (N = sum of knot multiplicities - K)
[in]	K	Order of the B-spline. (1 <= K <= 20)
[in]	X1	Lower end point of quadrature interval. (T(K) <= X1 <= T(N+1))
[in]	X2	Upper end point of quadrature interval. (T(K) <= X2 <= T(N+1))
[out]	Bquad	Integral of the B-spline over [X1, X2].
[out]	Info	= 0: Successful exit. = -1: The argument T() is invalid. = -2: The argument Bcoef() is invalid. = -3: The argument N had an illegal value. (N < K) = -4: The argument K had an illegal value. (K < 1 or K > 20) = -5: The argument X1 had an illegal value. (X1 < T(K) or X1 > T(N+1)) = -6: The argument X2 had an illegal value. (X2 < T(K) or X2 > T(N+1))

Reference: SLATEC

Example Program

Using the following table, compute S = integral of 1/(1 + x^2) dx [0, 4] (= atan(4)).

  x    1/(1 + x^2)
----- -------------
 -1        0.5
  0        1 
  1        0.5 
  2        0.2 
  3        0.1 
  4        0.05882
  5        0.03846
----- -------------

Sub Ex_Bsqad()
    Const Ndata = 7, A = 0, B = 4
    Dim X(Ndata - 1) As Double, Y(Ndata - 1) As Double, D(Ndata - 1) As Double
    Dim Ibcl As Long, Ibcr As Long, Fbcl As Double, Fbcr As Double, Kntopt As Long
    Dim T(Ndata + 5) As Double, Bcoef(Ndata + 1) As Double, N As Long, K As Long
    Dim Info As Long, S As Double
    '-- Data
    X(0) = -1: Y(0) = 0.5
    X(1) = 0: Y(1) = 1
    X(2) = 1: Y(2) = 0.5
    X(3) = 2: Y(3) = 0.2
    X(4) = 3: Y(4) = 0.1
    X(5) = 4: Y(5) = 0.05882
    X(6) = 5: Y(6) = 0.03846
    '-- B-spline interpolation
    Ibcl = 2: Fbcl = 0: Ibcr = 2: Fbcr = 0 '-- Natural spline
    Kntopt = 1
    Call Bint4(X(), Y(), Ndata, Ibcl, Ibcr, Fbcl, Fbcr, Kntopt, T(), Bcoef(), N, K, Info)
    If Info <> 0 Then
        Debug.Print "Error in Bint4: Info =", Info
        Exit Sub
    End If
    '-- Compute integral 1/(1 + x^2) dx [0, 4] (= atan(4))
    Call Bsqad(T(), Bcoef(), N, K, A, B, S, Info)
    Debug.Print "S =", S, "S(true) =", Atn(4)
    Debug.Print "Info =", Info
End Sub

Example Results: S = 1.32679961538462 S(true) = 1.32581766366803

Info = 0