Contd5 Contd5_r Contd8 Contd8_r Contx1 Contx1_r Contx2 Contx2_r Derkf Derkf_r DerkfInt Dop853 Dop853_r Dopri5 Dopri5_r Doprin Doprin_r Dverk Dverk_r DverkInt Odex Odex2 Odex2_r Odex_r Retard Retard_r Ylag Ylag_r

Dopri5_r() Sub Dopri5_r ( N As  Long, T As  Double, Y() As  Double, Tout As  Double, RTol() As  Double, ATol() As  Double, RCont() As  Double, ICont() As  Long, Info As  Long, TT As  Double, YY() As  Double, YYp() As  Double, Irtrn As  Long, IRev As  Long, Optional Iout As  Long = 0, Optional Neval As  Long, Optional Nstep As  Long, Optional Naccept As  Long, Optional Nreject As  Long, Optional Hinit As  Double = 0, Optional Hmax As  Double = 0, Optional MaxIter As  Long = 0, Optional Nstiff As  Long = 0, Optional Safe As  Double = 0, Optional Fac1 As  Double = 0, Optional Fac2 As  Double = 0, Optional Beta As  Double = 0, Optional Cnt As  Long = 0  ) Initial value problem of ordinary differential equations (5(4)-th order Dorman-Prince method) (reverse communication version) NOTE - THIS PROGRAM IS DEPRECATED AND WILL BE REMOVED IN THE NEXT VERSION. Purpose This routine integrates a system of first order ordinary differential equations of the form dy/dt = f(t, y), y = y0 at t = t0 where t0 and y0 are the given initial values of t and y, respectively. y may be a vector if the above is a system of differential equations. Dopri5 is the explicit Runge-Kutta code based on the 5(4)-th order Dormand-Prince method. It is provided with the step control algorithm and the dense output feature. It is still efficient even if the number of output points becomes very large. See for details in the reference below. Dopri5_r is the reverse communication version of Dopri5. Parameters [in] N Number of differential equations. (N >= 1) [in,out] T This routine integrates from T to Tout. The initial point of the integration is to be given, and the last point of the final step will be returned. [in] Initial value of the independent variable T. [out] Last value of the independent variable T of the final step (normally equals to Tout). The solution was successfully advanced to this point. It is possible to continue the integration to new point by recalling this routine with the new Tout value with setting Info = 1. [in,out] Y() Array Y(LY - 1) (LY >= N) [in] Initial values of the dependent variables Y() at initial T. [out] Computed solution approximation at last T (normally equals to Tout). [in] Tout Set Tout to the point at which a solution is desired. Integration either forward in T (Tout > T) or backward in T (Tout < T) is permitted. The routine advances the solution from T to Tout using step sizes which are automatically selected so as to achieve the desired accuracy. [in] RTol() Array RTol(LRTol - 1) (LRTol >= 1) (all components of RTol() >= 0) The relative error tolerance(s) to tell the code how accurately you want the solution to be computed. This parameter may be a scalar (LRTol = 1) or a vector (LRTol = N). If LRTol = 2, ... or N-1, LRTol = 1 is assumed. If LRTol > N, LRTol = N is assumed. Even if LRTol = N, it is assumed to be 1 if LATol = 1. The tolerances are used by the code in a local error test at each step which requires roughly that   abs(local error of Y(i)) <= RTol(i)*abs(Y(i)) + ATol(i) for each component of Y() (i = 0 to LRTol-1). Setting RTol(i) = 0 results in a pure absolute error test on that component. RTol(i) and ATol(i) should not be zero at the same time (i = 0 to LRTol-1). [in] ATol() Array ATol(LATol - 1) (LATol >= 1) (all components of ATol() >= 0) The absolute error tolerance(s) to tell the code how accurately you want the solution to be computed. This parameter may be a scalar (LATol = 1) or a vector (LATol = N). If LATol = 2, ... or N-1, LATol = 1 is assumed. If LATol > N, LATol = N is assumed. Even if LATol = N, it is assumed to be 1 if LRTol = 1. The tolerances are used by the code in a local error test at each step which requires roughly that   abs(local error of Y(i)) <= RTol(i)*abs(Y(i)) + ATol(i) for each component of Y() (i = 0 to LATol-1). Setting ATol(i) = 0 results in a pure relative error test on that component. RTol(i) and ATol(i) should not be zero at the same time (i = 0 to LRTol-1). [in,out] RCont() Array RCont(LRCont - 1) (LRCont >= 5*N) Control information for dense output. (Not referenced if Iout = 0) [in,out] ICont() Array ICont(LICont - 1) (LICont >= N) Control information for dense output. (Not referenced if Iout = 0) [in,out] Info [in] = 0: Initialize and start computation (Solve new problem). = 1: Continue computation with new Tout value (Resume computation of previous call). [out] = -1: The argument N had an illegal value. (N < 1) = -3: The argument Y() is invalid. = -5: The argument RTol() had an illegal value. (RTol(i) < 0, RTol(i) = 0 and ATol(i) = 0) = -6: The argument ATol() had an illegal value. (ATol(i) < 0) = -7: The argument RCont() is invalid. = -8: The argument ICont() is invalid. = -9: the argument Info had an illegal value (Info <> 0 and Info <> 1) = -11: The argument YY() is invalid. = -12: The argument YYp() is invalid. = -14: the argument IRev had an illegal value. (IRev <> 0, 1 nor 5) = 1: Successful exit. = 2: Interrupted by Irtrn (normal return). = 11: Maximum number of steps exceeded. = 12: Step size becomes too small. = 13: Problem is probably stiff (interrupted). [out] TT IRev = 1: The value of T where the derivative values should be evaluated and given in YYp() in the next call. [out] YY() Array YY(LYY - 1) (LYY >= N) IRev = 1: The value of Y where the derivative values should be evaluated and given in YYp() in the next call. [in] YYp() Array YYp(LYYp - 1) (LYYp >= N) IRev = 1: The computed derivatives at given T (= TT) and Y (= YY()), i.e. YYp(i) = dyi/dt = fi(TT, YY(0), ..., YY(N-1)) (i = 0 to N-1), should be given in the next call. [in,out] Irtrn [in] IRev = 5: Do not alter except for the following special cases.   If Irtrn is set to the negative value, the integration will be interrupted and exit with Info = 2. If the numerical solution is altered in Solout, set Irtrn = 3. [out] IRev = 5: Returns 0, 1 or 2 in the first, intermediate or last return with IRev = 5, respectively. [in,out] IRev Control variable for reverse communication. [in] Before first call, IRev should be initialized to zero. On succeeding calls, IRev should not be altered. [out] If IRev is not zero, complete the following tasks and call this routine again without changing IRev. = 0: Computation finished. See return code in Info. = 1: User should set the computed derivative values at TT and YY() in YYp(). Do not alter any variables other than YYp(). = 5: User may output the intermediate result. Do not alter any variables. (See Iout) [in] Iout (Optional) Specifies if the intermediate result output is required. (default = 0) = 0: Output is not required. (Not return with IRev = 5) = 1: Returns after every successful step with IRev = 5 to output the intermediate results. This is same as calling Solout in the case of normal Dopri5 (non reverse communication version). The corresponding information is as follows. Nr = Naccept + 1, Told = previous T, T = current T, Y() = current Y(). RCont() and ICont() are used in the same way with Solout for the dense output. Y(i) = Contd5_r(i, T2, RCont(), ICont()) (If other value is specified for Iout, Iout = 0 will be assumed) [out] Neval (Optional) Number of function evaluations. [out] Nstep (Optional) Number of computed steps. [out] Naccept (Optional) Number of accepted steps. [out] Nreject (Optional) Number of rejected steps. (Step rejections in the first step are not counted) [in] Hinit (Optional) Initial step size. (default = to be estimated from the initial function values) (If Hinit = 0, the default value will be used) [in] Hmax (Optional) Maximal step size. (default = Tout - T) (If Hmax = 0, the default value will be used) [in] MaxIter (Optional) Maximum number of allowed steps. (default = 100000) (If MaxIter <= 0, the default value will be used) [in] Nstiff (Optional) Test for stiffness is activated after every Nstiff steps. (default = 1000) If Nstiff < 0, the stiffness test is not activated. (If Nstiff = 0, the default value will be used) [in] Safe (Optional) The safety factor in step size prediction. (0.0001 < Safe < 1) (default = 0.9) (If Safe <= 0.0001 or Safe >= 1, the default value will be used) [in] Fac1 (Optional) [in] Fac2 (Optional) Parameters for step size selection. (default: Fac1 = 0.2, Fac2 = 10) The new step size is chosen subject to the restriction   Fac1 <= Hnew/Hold <= Fac2. (If Fac1 = 0 or Fac2 = 0, the default values will be used) [in] Beta (Optional) The parameter for the stabilized step size control. (Beta <= 0.2) (default = 0.04) (If Beta < 0 or Beta > 0.2, 0 is assumed) [in] Cnt (Optional) Specifies when Neval, Nstep, Naccept and Nreject are reset to zero. (default = 0) = 0: Reset whenever this routine is called. <> 0: Reset only if this routine is called with Info = 0. Reference E. Hairer, S.P. Norsett and G. Wanner, "Solving Ordinary Differential Equations. Nonstiff Problems. 2nd edition", Springer Series in Computational Mathematics, Springer-Verlag (1993) Example Program (1) Solve the following initial value problem of ordinary differential equations. dy1/dt = -2*y1 + y2 - cos(t) dy2/dt = 2*y1 - 3*y2 + 3*cos(t) - sin(t) (y1 = 1, y2 = 2 at t = 0) Sub F1(N As Long, T As Double, Y() As Double, Yp() As Double) Yp(0) = -2 * Y(0) + Y(1) - Cos(T) Yp(1) = 2 * Y(0) - 3 * Y(1) + 3 * Cos(T) - Sin(T) End Sub Sub Ex_Dopri5_r() Const N = 2 Dim T As Double, Y(N - 1) As Double, Tend As Double, Tout As Double Dim RTol(0) As Double, ATol(0) As Double, Info As Long Dim RCont() As Double, ICont() As Long, TT As Double Dim YY(N - 1) As Double, YYp(N - 1) As Double, Irtrn As Long, IRev As Long RTol(0) = 0.0000000001 '1.0e-10 ATol(0) = RTol(0) T = 0: Tend = 10: Y(0) = 1: Y(1) = 2 Info = 0 Do Tout = T + 1 IRev = 0 Do Call Dopri5_r(N, T, Y(), Tout, RTol(), ATol(), RCont(), ICont(), Info, TT, YY(), YYp(), Irtrn, IRev) If IRev = 1 Then Call F1(N, TT, YY(), YYp()) Loop While IRev <> 0 If Info <> 1 Then Debug.Print "Error in Dopri5_r: Info =", Info Exit Do End If Debug.Print T, Y(0), Y(1) Loop While Tout < Tend End Sub Example Results 1 0.367879441193688 0.908181746995853 2 0.13533528322734 -0.280811553289576 3 4.97870683500648E-02 -0.940205428195432 4 1.83156388723754E-02 -0.635327981941068 5 6.73794700675574E-03 0.290400132447405 6 2.4787521939019E-03 0.962649038792233 7 9.1188198233568E-04 0.75481413627468 8 3.35462627424841E-04 -0.145164571180089 9 1.2340978747767E-04 -0.911006852047013 10 4.53999120696984E-05 -0.839026129110666 Example Program (2) Solve the following initial value problem of ordinary differential equations (using dense output). dy1/dt = -2*y1 + y2 - cos(t) dy2/dt = 2*y1 - 3*y2 + 3*cos(t) - sin(t) (t = 0 において y1 = 1, y2 = 2) Sub F1(N As Long, T As Double, Y() As Double, Yp() As Double) Yp(0) = -2 * Y(0) + Y(1) - Cos(T) Yp(1) = 2 * Y(0) - 3 * Y(1) + 3 * Cos(T) - Sin(T) End Sub Sub Ex_Dopri5_r_2() Const N = 2 Dim T As Double, Y(N - 1) As Double, Tend As Double Dim RTol(0) As Double, ATol(0) As Double, Info As Long Dim RCont(5 * N - 1) As Double, ICont(N - 1) As Long, TT As Double Dim YY(N - 1) As Double, YYp(N - 1) As Double, Irtrn As Long, IRev As Long Dim Iout As Long, Tout As Double, Y0 As Double, Y1 As Double RTol(0) = 0.0000000001 '1.0e-10 ATol(0) = RTol(0) Iout = 1 T = 0: Tend = 10: Y(0) = 1: Y(1) = 2 Tout = 1 Info = 0 IRev = 0 Do Call Dopri5_r(N, T, Y(), Tend, RTol(), ATol(), RCont(), ICont(), Info, TT, YY(), YYp(), Irtrn, IRev, Iout) If IRev = 1 Then Call F1(N, TT, YY(), YYp()) ElseIf IRev = 5 Then While T >= Tout Y0 = Contd5_r(0, Tout, RCont(), ICont()) Y1 = Contd5_r(1, Tout, RCont(), ICont()) Debug.Print Tout, Y0, Y1 Tout = Tout + 1 Wend End If Loop While IRev <> 0 If Info <> 1 Then Debug.Print "Error in Dopri5_r: Info =", Info End Sub Example Results 1 0.367879441187881 0.908181747006775 2 0.135335283237205 -0.280811553309717 3 4.97870683667704E-02 -0.940205428229821 4 1.83156388900869E-02 -0.635327981977462 5 6.73794699879586E-03 0.290400132463192 6 2.47875219132359E-03 0.962649038797553 7 9.11881968405946E-04 0.754814136303386 8 3.3546265009956E-04 -0.145164571227014 9 1.23409786683808E-04 -0.911006852045392 10 4.53999126645588E-05 -0.83902612911184